Machine Data Display Filter - Siemens SINUMERIK 840Di Manual

06.03
Number
9235 USER_BEGIN_WRITE_RPA_2
9236 USER_END_WRITE_RPA_2
9237 USER_CLASS_WRITE_RP A_3
9238 USER_BEGIN_WRITE_RPA_3
9239 USER_END_WRITE_RPA_3
9240 USER_CLASS_WRITE_TOA_NAME
9241 USER_CLASS_WRITE_TOA_TYPE
9247 USER_CLASS_BASE_ZERO_OFF_P A
9248 USER_CLASS_BASE_ZERO_OFF_MA
Single data
10.2.3

Machine data display filter

Machine data
areas
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Identifier
Start of the second RPA area
End of the second RPA area
Protection level for the third RPA area
Start of the third RPA area
End of the third RPA area
Change tool name and duplo
Change tool type
IAM, IM1 availability of the basic offset in the Pa-
rameter operating area
IAM, IM1 availability of the basic offset in the Ma-
chine operating area
References: /FB/ Description of Functions – Basic Machine:
A2, Various Interface Signals
Section: MMC machine data for protection levels
The protection level of individual machine and/or setting data can be modified in
the file SGUD.DEF.
Example:
The axial machine data item CTRLOUT_SEGMENT_NR requires protection
level 3 for reading and protection level 2 for writing.
Syntax:
REDEF $machine data string APR n APW m
APR n: Defining the protection level for reading (Read) the data
APW m: Defining the protection level for writing (Write) the data
File SGUD.DEF:
%_N_UGUD_DEF
;$PATH=/_N_DEF_DIR
REDEF $MA_CTRLOUT_SEGMENT_NR APR 3 APW 2
M30
References: /PGA/ Programming Guide Advanced
Section: File and Program Management
Through the use of the machine data display filter, it is possible to reduce the
number of displayed machine data of a certain area, e.g. general machine data
or channel machine data, for special purposes.
Display filters are provided for the following machine data areas:
S
General machine data
10 NC Start-Up with HMI Advanced
10.2 Machine and setting data
Name
Defining protection levels for user data (GUD)
Ref.
10-279