Axis Names - Siemens SINUMERIK 840Di Manual

06.03
Machine data
Table 10-16 Axis configuration: Machine data
Number
General ($MN_ ...)
13050 DRIVE_LOGIC_ADDRESS
Channel-specific ($MC_ ...)
20050 AXCONF_GEOAX_ASSIGN_TAB
20070 AXCONF_MACHAX_USED
Axis-specific ($MA_ ...)
30110 CTRLOUT_MODULE_NR
30220 ENC_MODULE_NR
References
10.5.2

Axis names

Machine axes
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Identifier
I/O address of drive
Assignment of geometry axis to channel axis
Machine axis number valid in channel
Setpoint assignment
Actual-value assignment
/FB/ Description of Functions, Basic Machine,
K2 Axes, Coordinate Systems, Frames, Actual-Value System for
Workpiece IWS, Section: Axes
Each machine, channel and geometry axis can/must be assigned an individual
name unambiguously identifying it in its name range.
The machine data
S
MD10000: AXCONF_MACHAX_NAME_TAB [n] (machine axis name)
is used to define the machine axis names.
Machine axis names must be unambiguous for the entire NC.
The names and the corresponding index defined in the machine data above is
used for
S
accessing axis-specific machine data (loading, saving, displaying)
S
reference point approach from the parts program G74
S
measuring
S
test point traversing from the parts program G75
S
traversing the machine axis from PLC
S
display of axis-specific alarms
S
display in the actual-value system (machine-related)
S
DRF handwheel function.
10 NC Start-Up with HMI Advanced
10.5 Axes and spindles
Name/remarks Ref.
10-311