Graphic Display - Siemens SINUMERIK 840Di Manual

06.03
13.5

Graphic display

Display of
measurement
results
Fig. 13-6 Menu: Display of measurement with marker X = ON
Soft keys:
X marker ON
Y marker ON
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
You can have the measurement results displayed by pressing soft key Display
in the relevant main menu of the measuring function after completion of mea-
surement.
When the soft keys X marker ON and Y marker ON are pressed, a vertical or
horizontal line with a circle is displayed on the measurement curve.
The corresponding values, e.g. for damping, frequency, degrees, etc. are dis-
played in the appropriate diagram.
Use the cursor keys to move the markers:
– slowly: Cursor key
– fast: Shift key + cursor key
13 Drive Optimization using HMI Advanced
13.5 Graphic display
13-431