Siemens SINUMERIK 840Di Manual page 388

10 NC Start-Up with HMI Advanced
10.6 Digital and analog I/O devices
Interface signals
Table 10-52 Digital and analog I/Os: Interface signals
DB num- Bit, Byte
ber
General
10 0, 122, 124, 126, 128
10 1, 123, 125, 127, 129
10 4, 130, 134, 138, 142
10 5, 131, 135, 139, 143
10 6, 132, 136, 140, 144
10 7, 133, 137, 141, 145
10 146
10 147
10 148–163
10 166
10 167
10 168
10 170–185
10 60, 186–189
10 64, 190–193
10 194–209
10 210–225
10-388
Signals from PLC to NC
Disable digital NC inputs
Set digital NC inputs from the PLC
Disable digital NC outputs
Overwrite screen form of digital NC outputs
Setting value of digital NC outputs from PLC
Setting screen form of digital NC outputs
Disable analog NC inputs
Setting screen form of analog NC inputs
Setting value for analog NC inputs from PLC
Overwrite screen form of analog NC outputs
Setting screen form of analog NC outputs
Disable analog NC outputs
Setting value for analog NC outputs from PLC
Signals from NC to PLC
Actual value of digital NC inputs
Setpoint of digital NC outputs
Actual value of analog NC inputs
Setpoint of analog NC outputs
Name
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03
Ref.