Siemens SINUMERIK 840Di Manual page 254

Hide thumbs Also See for SINUMERIK 840Di:

Table of Contents

8 PLC Start-Up

8.2 PLC program

The individual blocks in the basic PLC program can be processed in the SI-

MATIC Manager STEP7:

Select the appropriate block, e.g. OB 100 in the folder Blocks of the corre-

sponding Module.

Use the menu command Edit > Open Object to open the block or double-

click with the left mouse button on the block.

Edit the block using the LAD/STL/CSF editor

Switch over the block display using the menu command View > LAD or STL

SINUMERIK 840Di Manual (HBI) – 06.03 Edition