Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Connected Network Drive (last)
Connect to Network Drive
Show Connected Network Drives
Disconnect from all Network Drives
Change install directory
Install from H:<PFAD>
Return to previous Menu
Your Choice [1,2,3,5,9] ?
7. To start the data transfer, choose Install from H:<PATH> using the key "5".
– When the transmission is complete, the PCU will reboot.
When the control is booted for the next time under Windows NT, the software
(setup.exe) contained in the installation directory D:\INSTALL is installed auto-
15 SW Installation/Update and Data Backup
15.2 Software installation/update