Show Lldp Neighbor - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Example
The following example shows LLDP global configurations and configurations on port 1:
zte(cfg)#show lldp config
Global:
Lldp hellotime
Lldp holdtime
Lldp maxneighbor: 31
Lldp curneighbor: 0
zte(cfg)#show lldp config
port-1:
Lldp port enable : enabledRxTx
Lldp maxneighbor : 8
Lldp curneighbor : 0
Lldp selected med tlv type:NULL

4.34.12 show lldp neighbor

Purpose
This command shows LLDP neighbor summary information.
Command Mode
All configuration modes
Syntax
show lldp neighbor port <portlist>
Parameter Description
Parameter
<portlist>
Example
The following example shows global neighbor summary information:
zte(cfg)#show lldp neighbor
Capability Codes:
P-Repeater, B-Bridge, W-WLAN Access Point, R-Router, T-Telephone
C-DOCSIS Cable Device, s-Station, S-Switch, O-Other
Interface DeviceID
--------------------------------------------------------------------------
port-30
SJ-20130731155059-003|2013-11-27 (R1.0)
: 30s
: 120s
port 1
Description
Port list
Hdtm Capability Platform
00.50.43.3c.3b.5d 118 B S ZXR10 2952E Version
V2.05.11B10
4-520
PortID
port-32
ZTE Proprietary and Confidential