Sflow; Set Sflow Agent-Address - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter
member <1-253>
Example
The following example makes a member switch log in to the commander:
Mem1.zte(cfg)#rlogin commander
Trying
Connecting ...
Cmdr.zte>
The following example makes commander log in to member 1:
Cmdr.zte(cfg)#rlogin member 1
Trying
Connecting ...
Mem1.zte>

5.7 SFlow

5.7.1 set sflow agent-address

Purpose
This command sets the SFLOW agent.
Command Mode
Global configuration mode
Syntax
set sflow agent-address <A.B.C.D>[udp-port <1-65535>]
Parameter Description
Parameter
<A.B.C.D>
<1-65535>
Guidelines
In SFLOW application, the switch plays the SFLOW agent role and in general, the agent
address is configured as the IP address of the switch.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
The commander logs in to a member. <1-253> is the ID of the
member.
...Open
...Open
Description
IIP address of the SFLOW agent.
Number of the UDP port used to send SFLOW sampling
messages.
5-60
ZTE Proprietary and Confidential