Set Ethernet-Oam Port Period Timeout Mode - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<portlist>
enable
disable
Guidelines
The specified ports automatically initiate link discovery processes if the OAM function is
enabled globally and enabled on these ports.
Default
The OAM function is disabled on ports.
Example
The following example enables the OAM function on port 1:
zte(cfg)#set ethernet-oam port 1 enable

4.30.3 set ethernet-oam port period timeout mode

Purpose
This command sets the OAM discovery period, timeout duration, and mode on the specified
ports.
Command Mode
Global configuration mode
Syntax
set ethernet-oam port <portlist> period <1-10> timeout <2-20> mode {active | passive}
Parameter Description
Parameter
<portlist>
<1-10>
<2-20>
active
passive
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
Enables the OAM function on the specified ports.
Disables the OAM function on the specified ports.
Description
Port list.
Sending period of oampdu messages, unit: 100 milliseconds,
default: 10.
Timeout duration when the link is established, unit: seconds,
default: 5.
Active discovery mode.
Passive discovery mode.
4-487
Chapter 4 Service Configuration
ZTE Proprietary and Confidential