Set Sflow Ingress/Egress Port Packet-Sample On Time-Range - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter Description
Parameter
ingress
egress
<portlist>
Guidelines
The SFLOW sampling function is disabled on ports.
Example
The following example disables ingress sampling on ports 2 and 3:
zte(cfg)#set sflow ingress port 2,3 packet-sample off

5.7.7 set sflow ingress/egress port packet-sample on time-range

Purpose
This command enables or disables SFLOW sampling on ports. If SFLOW sampling is
enabled, configure the sampling period.
Command Mode
Global configuration mode
Syntax
set sflow {ingress | egress} port <portlist> packet-sample on frequency <2-16000000>[tim
e-range <word>]
Parameter Description
Parameter
ingress
egress
<portlist>
<2-16000000>
<word>
Guidelines
When enabling the SFLOW sampling, configure the sampling period in accordance with
the network bandwidth. If the sampling period is too small and the system load is too
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Configures the ingress SFLOW.
Configures the egress SFLOW.
Port list.
Description
Configures the ingress SFLOW.
Configures the egress SFLOW.
Port list.
Sampling period. 2 means that one of every two messages is
sampled to the CPU.
Name of the time-range to be bound.
5-64
ZTE Proprietary and Confidential