Iptv Channel Mvlan Groupip Count - Zte ZXR10 2900E Series Command Reference Manual

4.11.7 iptv channel mvlan groupip count

Purpose
This command adds channels (multicast groups) to the specified VLAN and names the
channels in batches.
Command Mode
NAS configuration mode
Syntax
iptv channel mvlan <1-4094> groupip <A.B.C.D> count <1-1032>[prename <prename>]
Parameter Description
Parameter
<1-4094>
<A.B.C.D>
<1-1032>
prename <prename>
Guidelines
If the prefix of channel names is set, the names of the channels use the prefix followed
by a number starting with 1. The channel names cannot be CHNAMEN, where N ranges
from 0 to 1031.
Example
The following example adds channels to VLAN 2 in batches. The start IP address is
230.0.0.1, the number of channels is 10, and the name prefix is NET-TV.
zte(cfg-nas)#iptv channel mvlan 2 groupip 230.0.0.1 count 10 prename NET-TV
zte(cfg-nas)#show iptv channel
MaxChannelNum:1032
CurChannelNum:12
HisChannelNum:12
Id
------
0
1
2
3
4
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Multicast VLAN ID that the channels to be added correspond to.
Start multicast IP address of the channels to be added in batches.
Number of channels to be added in batches.
Prefix of channel names, which contains a maximum of 28
characters.
Name
--------------------------------
CHNAME0
NET-TV1
NET-TV2
NET-TV3
NET-TV4
Chapter 4 Service Configuration
GroupIp
---------------
224.0.1.1
230.0.0.1
230.0.0.2
230.0.0.3
230.0.0.4
4-157
ZTE Proprietary and Confidential
MVlan
------
1
2
2
2
2