Set Port Duplex - Zte ZXR10 2900E Series Command Reference Manual

Syntax
set port <portlist> speedadvertise maxspeed
set port <portlist> speedadvertise {speed10 | speed100 | speed1000}{fullduplex | halfduplex}
Parameter Description
Parameter
<portlist>
maxspeed
speed10
speed100
speed1000
fullduplex
halfduplex
Guidelines
Port speedadvertise is used to configure what speed and duplex mode that a local port uses
to negotiate with a peer port in the port negotiation process. For example, if a GE port is set
to speed100/fullduplex, the GE port will negotiate with the peer port at speed100/fullduplex.
If maxspeed is selected, it is 100M/fullduplex for a 100M port and 1000M/fullduplex for a
1000M port.
Default
By default, maxspeed is selected.

4.2.4 set port duplex

Purpose
This command sets the working mode of ports to full duplex or half duplex.
Command Mode
Global configuration mode
Syntax
set port <portlist> duplex {full | half | auto}
Parameter Description
Parameter
<portlist>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
Sets port speedadvertise to the maximum speed.
Sets port speedadvertise to 10 Mbps.
Sets port speedadvertise to 100 Mbps.
Sets port speedadvertise to 1000 Mbps.
Full duplex.
Half duplex.
Description
Port list.
4-47
Chapter 4 Service Configuration
ZTE Proprietary and Confidential