Set Port Work-Mode; Set Port Speedadvertise - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
zte(cfg)#set port 1,5-7,11 enable

4.2.2 set port work-mode

Purpose
This command controls combo ports to switch between the optical mode and the electrical
mode.
Command Mode
Global configuration mode
Syntax
set port <portlist> work-mode {fiber | copper | auto [ prefer { first-up | fiber | copper }]}
Parameter Description
Parameter
<portlist>
fiber
copper
auto
first-up
fiber
copper
Guidelines
After optoelectronic switching, the configuration of some special ports (such as the MDIX
port) may be restored to the default. For example, after the MDIX port is configured in
copper mode, if the mode is switched to the fiber mode, the MDIX port will be restored to
the default configuration.

4.2.3 set port speedadvertise

Purpose
This command sets port speedadvertise.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
1000BASE-X optical mode.
1000BASE-T electrical mode.
Automatic switching between the optical mode and the electrical
mode.
Ports are up in order, which means that the port that establishes
the connection first is up first.
Optical ports are up first.
Electrical ports are up first.
4-46
ZTE Proprietary and Confidential