Set Event - Zte ZXR10 2900E Series Command Reference Manual

zte(cfg-snmp)#set alarm 10 owner user1
The following example sets the status of the alarm group whose index is 10 to invalid:
zte(cfg-snmp)#set alarm 10 status invalid

5.5.4 set event

Purpose
This command sets an event group.
Command Mode
SNMP configuration mode
Syntax
set event <1-65535>{description <string>| type {none | log | snmptrap | logandtrap}| owner
<name>| community <name>| status {valid | underCreation | createRequest | invalid}}
Parameter Description
Parameter
event <1-65535>
<string>
none
log
snmptrap
logandtrap
owner <name>
community <name>
valid
underCreation
createRequest
invalid
Example
The following example sets the description information of the event group whose index is
10 to initial:
zte(cfg-snmp)#set event 10 description initial
The following example sets the type of the event group whose index is 10 to log:
zte(cfg-snmp)#set event 10 type log
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
Description
Index of the event group.
Index description.
The type of the event group is non-operation.
The type of the event group is log.
The type of the event group is trace.
The type of the event group is trace and log.
Name of the owner.
Name of the community.
The status of the event group is valid.
The status of the event group is underCreation.
The status of the event group is createRequest.
The status of the event group is invalid.
5-33
ZTE Proprietary and Confidential