Set Qos Policer Counter-Mode - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<0-383>
<0-127>
no-change
enable-modify
disable-modify
Guidelines
To make the binding relation between policer and profile effective, configure exceed-action
to remark first.

4.14.44 set qos policer counter-mode

Purpose
This command sets the traffic statistics mode for flow policers.
Command Mode
Global configuration mode
Syntax
set qos policer counter-mode {L1 | L2 | L3}
Parameter Description
Parameter
L1
L2
L3
Guidelines
Take flow statistics by byte.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Flow policer ID.
qos-profile template number.
qos-profile does not modify UP/DSCP fields, but egress ACLs can
modify UP/DSCP fields.
qos-profile can modify UP/DSCP fields.
Neither qos-profile nor egress ACLs modify UP/DSCP fields.
Description
The statistics includes preamble, IPG, L2, L3, Data, and Cyclic
Redundancy Check (CRC).
The statistics includes L2, L3, Data, and CRC.
The statistics includes L3 and Data.
4-335
Chapter 4 Service Configuration
ZTE Proprietary and Confidential