Set Qos Policer Exceed-Action Remark Profile - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Syntax
set qos policer <0-383> exceed-action red {no-operation | drop | remark} yellow {no-operation
| drop | remark}
Parameter Description
Parameter
<0-383>
no-operation
drop
remark
Guidelines
After the process of the flow policer, the part exceeding the pre-set limit will be remarked
as yellow or red. The exceed action configures the process of red/yellow packets. When
the flow policer is configured, if the action is not configured, it is no-operation by default. 0
to 255 are used for ingress ACLs. Red packets and yellow packets support no-operation,
drop, and remark. 256 to 383 are used for egress ACLs. Red packets support no-operation
and drop. Yellow packets support no-operation.
Default
The packet with the related color is normally forwarded.

4.14.43 set qos policer exceed-action remark profile

Purpose
This command sets the binding relation between flow policer and qos-profile and the action
mode.
Command Mode
Global configuration mode
Syntax
set qos policer <0-383> exceed-action remark profile <0-127> up {no-change | enable-mo
dify | disable -modify} dscp { no-change | enable-modify | disable-modify }
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Flow policer ID. 0 to 255 are used for ingress ACLs. 256 to 383
are used for egress ACLs.
The packet with the related color is normally forwarded.
The packet with the related color is dropped.
Modify UP/DSCP fields in accordance with the qos-profile bound
to the flow policer.
4-334
ZTE Proprietary and Confidential