Ingress-Acl Hybrid Rule Type-Ipv6-Any - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference

4.13.35 ingress-acl hybrid rule type-ipv6-any

Purpose
This command sets the rule that the hybrid ingress ACL matches the IPv6 packet.
Command Mode
Hybrid ingress ACL configuration mode
Syntax
rule <1-500>{permit | deny} ipv6 any {<source-ipv6addr><sipv6-mask>| any}[<destination-ipv
6addr><dipv6-mask>| any][<vlan-id>]
Parameter Description
Parameter
<1-500>
permit
deny
ipv6 any
<source-ipv6addr>
<sipv6-mask>
any (first)
<destination-ipv6addr>
<dipv6-mask>
any (second)
<vlan-id>
Guidelines
The IPv6-any rule can match source-specified IPv6, any source IPv6, destination-specified
IPv6, any destination IPv6, and VLAN fields.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
This rule is only valid for IPv6 packet. Other packets ignore this
rule.
IPv6 Source network or host of the transmitted package. The
standard IPv6 address format is used, such as abcd:EF12::123 4.
Source mask and used for source. It is expressed by an integer.
The range is 1 to 128.
Matches all source IPv6 addresses, source and source mask are
all 0s.
The destination network or host address of the transmitted IPv6
packet. The standard IPv6 address format is used, such as
abcd:EF12::123 4
Destination mask. It is used for destination and represented by
one integer. The value range is 1 to 128.
Matches all destination IPv6 addresses. The destination and
destination mask are all 0s.
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
4-246
ZTE Proprietary and Confidential