L2Pt Configuration; Set L2Pt - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Command Mode
Global configuration mode
Syntax
set vlan pvlan session <1-4>{promise-port <portlist>| promise-trunk <trunklist>|isolate-p
ort<portlist>|isolate-trunk<trunklist>|communi-port <portlist>| communi-trunk <trunklis
t>}
Parameter Description
Parameter
<1-4>
<trunklist>
<portlist>
Guidelines
This command sets only one port type. Port types are accumulated in one session.

4.16 L2pt Configuration

4.16.1 set l2pt

Purpose
This command sets the mode for forwarding IEEE RESERVE MC messages.
Command Mode
Global configuration mode
Syntax
set l2pt <protocol-list>{enable | disable | invalid}
Parameters
Parameter
<protocol-list>
enable
disable
invalid
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
PLVAN session number
Trunk port list
Physical port list
Description
IEEE RESERVE MC protocol address range (0x00 to 0x2F).
Enables layer-2 transparent transmission of protocol messages.
Drops protocol messages.
Disables transparent transmission and recovers the default
configuration. Different protocols have different default
configurations.
4-354
ZTE Proprietary and Confidential