Set Mac Add Static Port Vlan - Zte ZXR10 2900E Series Command Reference Manual

Command Mode
Global configuration mode
Syntax
set port <trunklist> multicast-filter {enable | disable}
Parameter Description
Parameter
<trunklist>
enable
disable

4.7.4 set mac add static port vlan

Purpose
This command adds a MAC static entry based on port and VLAN.
Command Mode
Global configuration mode
Syntax
set mac add static <HH.HH.HH.HH.HH.HH> port <1-28> vlan <1-4094>
Parameter Description
Parameter
<HH.HH.HH.HH.HH.HH>
<1-28>
<1-4094>
Guidelines
If a static MAC entry is added, the MAC address will not be aging or floating and will
disappear after the device is restarted.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Trunk list.
Enables the unregistered multicast filtering function, which means
to drop the unregistered multicast packets.
Disables the unregistered multicast filtering function, which means
to forward the unregistered multicast packets.
Description
MAC address. Multicast addresses, broadcast addresses, and
all-zero addresses cannot be added.
Port number. Different devices have different port number ranges.
In the syntax, the 2928E device is used as an example.
VLAN ID.
4-93
Chapter 4 Service Configuration
ZTE Proprietary and Confidential