Set Qos Traffic-Limit Port Protect - Zte ZXR10 2900E Series Command Reference Manual

Syntax
set qos traffic-limit port <1-28> percent <1-100>
Parameter Description
Parameter
<1-28>
<1-100>
Example
The following example sets the percent of the ingress rate limit to the physical bandwidth
to 50 for port 2:
zte(cfg)#set qos traffic-limit port 2 percent 50

4.14.22 set qos traffic-limit port protect

Purpose
This command sets port protection. When the traffic on the port exceeds the rate limit, the
port is shut down and becomes unavailable for a specified period.
Command Mode
Global configuration mode
Syntax
set qos traffic-limit port <1-28> protect {enable | disable | time <1-10>}
Parameter Description
Parameter
<1-28>
enable
disable
time
<1-10>
Guidelines
This command is mutually exclusive with the set qos traffic-limit port trap command.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port number. The range varies with the device type. Use the
2928E as an example.
Percent.
Description
Port number. The range varies with the device type. Use the
2928E as an example.
Enables the port protection function.
Disables the port protection function.
Shuts down the port.
Duration when the port is unavailable, unit: minutes.
4-317
Chapter 4 Service Configuration
ZTE Proprietary and Confidential