Set Lacp Priority; Set Lacp Load-Balance - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<portlist>
short
long
Guidelines
To set timeout processing for a port, add the port to a LACP aggregation group first.
Example
The following example sets long timeout for ports 1, 5, 6 and 7:
zte(cfg)#set lacp port 1,5-7 timeout long

4.9.7 set lacp priority

Purpose
This command sets the LACP priority.
Command Mode
Global configuration mode
Syntax
set lacp priority <1-65535>
Parameter Description
Parameter
<1-65535>
Default
The default priority is 32768.

4.9.8 set lacp load-balance

Purpose
This command sets the LACP load balance mode.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list
Short timeout
Long timeout
Description
Priority, any number ranging from 1 to 65535.
4-125
Chapter 4 Service Configuration
ZTE Proprietary and Confidential