Copying A File - Zte ZXR10 2900E Series Command Reference Manual

Parameter
<local-file-name>
upload
<remote-file-name>
download
<string>
<string>
Guidelines
The FTP
interface configuration, refer to
Configuration.

3.9 Copying a File

Purpose
This command copies a file.
Command Mode
File system configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Name of the file in the local Flash. The parameter can be in any
of the following formats:
1. If the parameter includes the absolute path, such as
2. If the parameter includes the relative path, such as
3. If the parameter does not include any path, such
Uploads a local file to the server.
Name of the file on the server. The parameter can be in any of the
following formats:
1. If the parameter includes a path, such as \cfg\startru
2. If the parameter does not include any path, such
Downloads a file from the server to the local Flash.
User name used to log in to the FTP server.
Password used to log in to the FTP server.
command requires support of the layer-3 interface of the switch. For layer-3
Chapter 3 File System Configuration
/cfg/startrun.dat (device format), the full path name of
the file is /cfg/startrun.dat.
cfg/startrun.dat, the full path name of the file is
/cfg/startrun.dat (suppose the current path of the local
Flash is "/").
as startrun.dat, the full path name of the file is
/cfg/startrun.dat (suppose the current path of the local
Flash is /cfg/).
n.dat (windows format), the full path name of the file is
D:\svn_2900e\prj\cfg\startrun.dat (suppose the
path of the FTP server is D:\svn_2900e\prj\).
as startrun.dat, the full path name of the file is
D:\svn_2900e\prj\startrun.dat (suppose the path of
the FTP server is D:\svn_2900e\prj\).
4.17 IPv4 Layer 3 Configuration
3-9
and 4.18 IPv6 Layer 3
ZTE Proprietary and Confidential