Set Ntp Src-Udp-Port; Show Ntp - Zte ZXR10 2900E Series Command Reference Manual

4.23.11 set ntp src-udp-port

Purpose
This command sets the ID of the source UDP port of NTP packets.
Command Mode
Global configuration mode
Syntax
set ntp src-udp-port {123 | 1000}
Parameter Description
Parameter
123
1000
Default
The ID of the source UDP port is 1000.

4.23.12 show ntp

Purpose
This command shows the NTP configuration.
Command Mode
All configuration modes
Syntax
show ntp
Example
The following example shows the NTP configuration:
zte(cfg)#show ntp
ntp protocol is enabled
ntp server address
ntp source address
ntp second server protocol version ：2
ntp second server address
ntp second server key
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
The ID of the source UDP port of the sent NTP packets is 123.
The ID of the source UDP port of the sent NTP packets is 1000.
: 10.40.89.78
: None
:192.168.1.1
:100
4-423
Chapter 4 Service Configuration
ZTE Proprietary and Confidential