Set Dhcp Hop; Clear Ipport Dhcp Relay - Zte ZXR10 2900E Series Command Reference Manual

4.44.22 set dhcp hop

Purpose
This command sets the hop limits of a DHCP relay.
Command Mode
Global configuration mode
Syntax
set dhcp hop <1-16>
Parameter Description
Parameter
<1-16>
Example
The following example sets the hop limit of a DHCP relay to 10:
zte(cfg)#set dhcp hop 10

4.44.23 clear ipport dhcp relay

Purpose
This command clears the DHCP relay configuration on a port.
Command Mode
Layer-3 configuration mode
Syntax
clear ipport <0-63> dhcp relay {agent | server <A.B.C.D>}
Parameter Description
Parameter
<0-63>
agent
server
<A.B.C.D>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Hop limit of a DHCP relay.
Description
Layer-3 interface ID.
Agent of the DHCP relay.
Server IP address.
DHCP server address.
4-603
Chapter 4 Service Configuration
ZTE Proprietary and Confidential