Clear Ipport - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter
<A.B.C.D><A.B.C.D>
<A.B.C.D>
Guidelines
This command without parameters deletes all static route entries, but does not delete
direct-connect routes.
Example
The following example deletes all static routes:
zte(cfg-router)#clear iproute
The following example deletes the static route to the network 192.168.1.0/24 with the
gateway of 192.168.1.12:
zte(cfg-router)#clear iproute 192.168.1.0/24 192.168.1.12

4.17.14 clear ipport

Purpose
This command deletes configurations of a layer-3 port.
Command Mode
Layer-3 configuration mode
Syntax
clear ipport <0-63>[dhcp | ipaddress | mac | vlan]
Parameters
Parameter
<0-63>
dhcp
ipaddress
mac
vlan
Guidelines
To delete configurations of a layer-3 port, disable the port first. This command will
recover the default configurations of the port (IP address: 0.0.0.0, MAC address:
00.00.00.00.00.00, binding VALN: VALN 0).
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
IP address and mask
Gateway
Description
Number of a layer-3 port.
Deletes the DHCP address configuration of a layer-3 port.
Deletes the IP address configuration of a layer-3 port.
Deletes the MAC address configuration of a layer-3 port.
Deletes the VLAN configuration of a layer-3 port.
4-364
ZTE Proprietary and Confidential