Set Zesr Restart-Time; Set Zesr Ctrl-Vlan Tcn-Sending - Zte ZXR10 2900E Series Command Reference Manual

Example
The following example sets the mode of destination MAC addresses in protocol packets
to special:
zte(cfg)#set zesr protocol-mac special

4.29.11 set zesr restart-time

Purpose
This command sets the restart time.
Command Mode
Global configuration mode
Syntax
set zesr restart-time < 30-600>
Parameter Description
Parameter
< 30-600>
Default
120 seconds
Example
The following example sets the restart time to 33:
zte(cfg)#set zesr restart-time 33

4.29.12 set zesr ctrl-vlan tcn-sending

Purpose
This command enables or disables the TCN sending function in a ZESR domain.
Command Mode
Global configuration mode
Syntax
set zesr ctrl-vlan <1-4094> tcn-sending {enable | disable}
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Restart time, range: 30–600, unit: seconds.
4-483
Chapter 4 Service Configuration
ZTE Proprietary and Confidential