Lldp Port Med-Tlv-Select - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<portlist>
rxenable
rxdisable
Example
The following example enables the LLDP receiving function on port 1:
zte(cfg)#lldp port 1 rxenable

4.34.7 lldp port med-tlv-select

Purpose
This command sets the selected med tlv type on ports.
Command Mode
Global configuration mode
Syntax
lldp port <portlist> med-tlv-select {capabilities-tlv | network-policy-tlv}{enable | disable}
Parameter Description
Parameter
<portlist>
Guidelines
The capabilities TLV must be enabled before other LLDP-MED TLVs are enabled. Other
LLDP-MED TLVs must be disabled before the capabilities TLV is disabled.
Example
The following example enables the notification function of the LLDP-MED network policy
on port 1:
zte(cfg)#lldp port 1 med-tlv-select network-policy-tlv enable
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
Enables the LLDP receiving function.
Disables the LLDP receiving function.
Description
Port list.
4-517
Chapter 4 Service Configuration
ZTE Proprietary and Confidential