Set Mld Snp Vlan Delete Group; Set Mld Snp Vlan Add/Delete Mrouter Port - Zte ZXR10 2900E Series Command Reference Manual

4.35.5 set mld snp vlan delete group

Purpose
This command deletes the static group in the specified VLAN and deletes the ports in the
static group.
Command Mode
Global configuration mode
Syntax
set mld snooping vlan <1-4094> delete group <ipv6-address>[port <portlist>]
Parameter Description
Parameter
<1-4094>
delete
<ipv6-address>
<portlist>
Example
The following example deletes the static multicast group ff1e::22 from VLAN 1, and deletes
ports 1 to 10 from the static group:
zte(cfg)#set mld sn vlan 1 delete group ff1e::11 port 1-10

4.35.6 set mld snp vlan add/delete mrouter port

Purpose
This command adds/deletes an mrouter port to/from the specified VLAN.
Command Mode
Global configuration mode
Syntax
set mld snooping vlan <1-4094>{add | delete} mrouter port <1-28>
Parameter Description
Parameter
<1-4094>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
ID of the VLAN from which the static group is deleted.
Deletes the static group.
IPv6 address.
Deletes the ports in the group.
Description
ID of the VLAN into/from which the mrouter port is added/deleted.
4-525
Chapter 4 Service Configuration
ZTE Proprietary and Confidential