Create Community Public/Private - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<0-63>
Default
none
Example
The following example sets the SNMP source IP address to the IP address of IP port 1:
zte(cfg-snmp)#set src-ipport 1

5.4.4 create community public/private

Purpose
This command creates a community and allocates rights.
Command Mode
SNMP configuration mode
Syntax
create community <string>{public | private}[ingress-acl-basic-number <1-99>]
Parameter Description
Parameter
<string>
public
private
<1-99>
Example
The following example creates a community named as Beijing and sets the attribute to
read/write:
zte(cfg-snmp)#create community beijing private
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
Description
IP port number
Description
Community name.
The attribute of the community is read-only.
The attribute of the community is read/write.
ID of the ingress ACL basic group bound with the community.
5-11
ZTE Proprietary and Confidential