ZXR10 2900E Series Command Reference
3.13 Automatically Saving Configuration Files
3.13.1 set auto-saveconfig enable/disable
Purpose
This command enables or disables the function that the switch automatically uploads
configuration files to the TFTP server.
Command Mode
Global configuration mode
Syntax
set auto-saveconfig {enable | disable}
Parameter Description
Parameter
enable
disable
Guidelines
The function can be enabled only after serverip becomes valid with the set auto-saveconfig
serverip <A.B.C.D> command. Whenever the function is disabled, previously set serverip
and period are automatically restored to the default values.
Default
This function is disabled.
3.13.2 set auto-saveconfig serverip
Purpose
This command configures the IP address of the TFTP server to which the switch
automatically uploads configuration files.
Command Mode
Global configuration mode
Syntax
set auto-saveconfig serverip <A.B.C.D>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Enables the function.
Disables the function.
3-12
ZTE Proprietary and Confidential