Egress-Acl Hybrid Rule Type-Ipv6-Ip-Protocol - Zte ZXR10 2900E Series Command Reference Manual

Parameter
<vlan-id>
Guidelines
The IPv6-any rule can match source-specified IPv6, any source IPv6, destination-specified
IPv6, any destination IPv6, and VLAN fields.

4.13.69 egress-acl hybrid rule type-ipv6-ip-protocol

Purpose
This command sets the rule that the hybrid egress ACL matches the packets with
IPv6-specified fields.
Command Mode
Hybrid egress ACL configuration mode
Syntax
rule <1-500>{permit | deny} ipv6 <ip-protocol>{<source-ipv6addr><sipv6-mask>| any}[{<desti
nation-ipv6addr><dipv6-mask>| any}[<vlan-id>]]
Parameter Description
Parameter
<1-500>
permit
deny
ipv6
<ip-protocol>
<source-ipv6addr>
<sipv6-mask>
any
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
Description
Rule number
If the condition matches, access is permitted.
If the condition matches, access is denied.
This rule only matches IPv6 message. The non-IPv6 message
ignore this rule.
This rule is only valid for messages with the specified IP protocol
field. Ignore this rule for other messages. The range of IP protocol
field value is 0 to 255.
IPv6 Source network or host of the transmitted package. The
standard IPv6 address format is used, such as abcd:EF12::1234
Source mask and used for source. It is expressed by an integer.
The range is 1 to 128.
Matches all source IPv6 addresses, source and source mask are
all 0s.
4-281
Chapter 4 Service Configuration
ZTE Proprietary and Confidential