Set Dhcp Relay Vlan Enable/Disable; Clear Dhcp Relay Server - Zte ZXR10 2900E Series Command Reference Manual

4.44.18 set dhcp relay vlan enable/disable

Purpose
This command enables or disables the DHCP relay function based on VLANs. If the
DHCP function is enabled globally, the device provides the relay function when either this
command or the relay agent command is used.
Command Mode
Global configuration mode
Syntax
set dhcp relay vlan <vlanlist>{enable | disable}
Parameter Description
Parameter
enable
disable

4.44.19 clear dhcp relay server

Purpose
This command deletes a DHCP server IP address.
Command Mode
Global configuration mode
Syntax
clear dhcp relay server <A.B.C.D>
Parameter Description
Parameter
<A.B.C.D>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Enables the DHCP relay function.
Disables the DHCP relay function. By default, the DHCP function
is disabled.
Description
IP address of the DHCP server
4-601
Chapter 4 Service Configuration
ZTE Proprietary and Confidential