Show Mld Snp Vlan - Zte ZXR10 2900E Series Command Reference Manual

Have Host Group Number

4.35.18 show mld snp vlan

Purpose
This command shows results of MLD snooping.
Command Mode
All configuration modes
Syntax
show mld snooping vlan <1-4094>[group <ipv6-address>| port-info | group-source-filter | ho
st-source-filter ]
Parameter Description
Parameter
<1-4094>
group <ipv6-address>
port-info
group-source-filter
host-source-filter
Guidelines
The show mld snooping vlan <1-4094> command is used to display the basic condition about
snooping groups in this VLAN. The show mld snooping vlan <1-4094>[group <ipv6-address>]
command is used to display host information in this VLAN. The show mld snooping vlan
<1-4094>[ port-info] command is used to display information about all snooped ports in
the VLAN. The show mld snooping vlan <1-4094>[group-source-filter] command is used to
display group-based source filtering information. The show mld snooping vlan <1-4094>[ho
st-source-filter] command is used to display host-based source filtering information.
Example
The following example shows the MLD snooping configurations and snooping results of
VLAN 1:
zte(cfg)#show mld sn vlan 1
MLD Snooping
Querier
Working Mode
Max Group Number
SJ-20130731155059-003|2013-11-27 (R1.0)
: 0
Description
VLAN ID.
Information about a group.
Information about host ports.
Group-based source filtering information.
Host-based source filtering information.
: enable
: disable
: proxy
: 256
4-533
Chapter 4 Service Configuration
ZTE Proprietary and Confidential