Set Stp Hellotime - Zte ZXR10 2900E Series Command Reference Manual

Command Mode
Global configuration mode
Syntax
set stp {hmd5-digest | hmd5-key}{CISCO | HUAWEI}<0x00..0-0xff..f>
Parameter Description
Parameter
CISCO
HUAWEI
<0x00..0-0xff..f>

4.12.14 set stp hellotime

Purpose
This command sets the interval for the sending of STP messages.
Command Mode
Global configuration mode
Syntax
set stp hellotime <1-10>
Parameter Description
Parameter
<1-10>
Default
The interval is 2 seconds.
Example
The following example sets the interval to 1 second:
zte(cfg)#set stp hellotime 1
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
It is used when the device connects to a Cisco device.
It is used when the device connects to a Huawei device.
32-bit hexadecimal numeral. 0 means to recover the default
configuration.
Description
Interval (seconds) satisfying: 2* (forwarddelay–1) >= agemax and
agemax >= 2*(hellotime+1)
4-201
Chapter 4 Service Configuration
ZTE Proprietary and Confidential