Set Trap Macnotification Enable/Disable - Zte ZXR10 2900E Series Command Reference Manual

Command Mode
SNMP configuration mode
Syntax
set user <string><string> v3 [md5-auth <string>| sha-auth <string>[des56-priv <string>]]
Parameter Description
Parameter
user <string>
<string>
md5-auth <string>
sha-auth <string>
des56-priv <string>
Example
The following example sets the user name to zte, group name to BN , authentication mode
to md5–auth, and password to abc for SNMP V3:
zte(cfg-snmp)#set user zte BN v3 md5-auth abc

5.4.15 set trap macnotification enable/disable

Purpose
This command enables or disables the function of sending a trap notification if the MAC
address is changed on the specified port or trunk.
Command Mode
SNMP configuration mode
Syntax
set trap macnotification {port<1-52>| trunk<1-15>}{enable|disable}
Parameter Description
Parameter
port
<1-52>
trunk
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
Description
User name
Group name
md5 authentication mode and password
sha authentication mode and password
des56 encryption password
Description
Specified port.
Port number. Different devices have different port number ranges.
In the syntax, the 2952E device is used as an example.
Specified trunk.
5-19
ZTE Proprietary and Confidential