Set Trap Macnotification History-Size/Interval - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter
<1-15>
enable
disable
Example
The following example enables the function of sending a trap notification if the MAC
address is changed on ports 3, 5, and 8:
zte (cfg-snmp)#set trap macnotification port 3,5,8 enable

5.4.16 set trap macnotification history-size/interval

Purpose
This command sets the maximum number of entries in the MAC notification history table
and the threshold of the interval that MAC change notification traps are sent.
Command Mode
SNMP configuration mode
Syntax
set trap macnotification {history-size<1-256>| interval<1-3600>}
Parameter Description
Parameter
history-size
<1-256>
interval
<1-3600>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Trunk ID.
Enables the function of sending a trap notification if the MAC
address is changed on the specified port or trunk.
Disables the function of sending a trap notification if the MAC
address is changed on the specified port or trunk.
Description
Maximum number of entries in the MAC notification history table.
When the number of entries in the MAC notification history table
reaches the threshold, traps are sent.
Range of the maximum number of entries in the MAC notification
history table.
Threshold of the interval that MAC change notification traps are
sent. If the number of entries in the MAC notification history table
does not reach the threshold, when the period from the last time
traps are sent reaches the interval threshold, traps will be sent.
Range of the threshold of the interval that the MAC change
notification trap is sent.
5-20
ZTE Proprietary and Confidential