Set Loopdetect Extend Trunk; Show Loopdetect - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Guidelines
This command enables or disables trunk port protection when trunk port loopback occurs.
If trunk port protection is enabled, a trunk port is blocked when loopback is detected on the
port. If trunk port protection is disabled, an alarm is activated when loopback is detected
on a trunk port, and the port is not blocked.

4.37.10 set loopdetect extend trunk

Purpose
This command enables or disables the function of cross-device loopback detection for
trunk ports.
Command Mode
Global configuration mode
Syntax
set loopdetect extend trunk <trunklist>{enable | disable}
Parameter Description
Parameter
<trunklist>
enable
disable
Default
Trunk ports cannot perform cross-device loopback detection.

4.37.11 show loopdetect

Purpose
This command shows loop detection information.
Command Mode
Global configuration mode
Syntax
show loopdetect
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Trunk port list.
Trunk ports can perform cross-device loopback detection.
Trunk ports cannot perform cross-device loopback detection.
4-544
ZTE Proprietary and Confidential