Dot1X Tx-Period; Dot1X Supplicant-Timeout - Zte ZXR10 2900E Series Command Reference Manual

Example
The following example sets the authentication quiet time to 120 seconds:
zte(cfg-nas)#dot1x quiet-period 120

4.20.5 dot1x tx-period

Purpose
This command sets the waiting time before retransmitting an EAPOL data packet when
the authentication system cannot receive a response from the client system.
Command Mode
NAS configuration mode
Syntax
dot1x tx-period <1-65535>
Parameter Description
Parameter
<1-65535>
Default
30 seconds.
Example
The following example sets the waiting time to 120 seconds:
zte(cfg-nas)#dot1x tx-period 120

4.20.6 dot1x supplicant-timeout

Purpose
This command sets the timeout duration when the authentication system receives a data
packet from the authentication client system.
Command Mode
NAS configuration mode
Syntax
dot1x supplicant-timeout <1-65535>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Waiting time (seconds)
4-381
Chapter 4 Service Configuration
ZTE Proprietary and Confidential