Show Stp Instance - Zte ZXR10 2900E Series Command Reference Manual

Huawei digest: 0x00000000000000000000000000000000
Instance VlanMap
-------- -------------------
0

4.12.30 show stp instance

Purpose
This command shows the information about an instance or all instances.
Command Mode
All configuration modes
Syntax
show stp instance [<0-63>]
Parameter Description
Parameter
<0-63>
Example
The following example shows the information of instance 0:
zte(cfg)#show stp instance 0
RootID:
Priority
HelloTime(s)
ForwardDelay(s): 15
Reg RootID:
Priority
RemainHops
BridgeID:
Priority
HelloTime(s)
ForwardDelay(s): 15
Interface PortId Cost
--------- ------ --------- ------- ---------- ----- -----------
1
8
SJ-20130731155059-003|2013-11-27 (R1.0)
1-4094
Description
Instance ID. The command without this parameter shows the
information about all instances.
: 49152 Address
: 10 MaxAge(s)
: 49152 Address
: 10
: 49152 Address
: 10 MaxAge(s)
MaxHops
Status
96.1 200000 Forward Designated MSTP
128.8 200000 Forward Designated MSTP
Chapter 4 Service Configuration
: 00.d0.d0.07.40.13
: 6
: 00.d0.d0.07.40.13
: 00.d0.d0.07.40.13
: 6
: 10
Role Bound GuardStatus
None
None
4-211
ZTE Proprietary and Confidential