Default
The ZDP is enabled.
5.6.2 set zdp port/trunk enable/disable
Purpose
This command enables or disables the ZDP on ports/trunks.
Command Mode
Cluster management configuration mode
Syntax
set zdp {port <portlist>| trunk <trunklist>}{enable | disable}
Parameter Description
Parameter
port <portlist>
trunk <trunklist>
enable
disable
Default
The ZDP is enabled.
Example
The following example disables the ZDP on port 2:
zte(cfg-group)#set zdp port 2 disable
5.6.3 set zdp timer
Purpose
This command sets the time interval for sending ZDP packets.
Command Mode
Cluster management configuration mode
Syntax
set zdp timer <5-255>
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
Description
Port list
Trunk list.
Enables the ZDP.
Disables the ZDP.
5-39
ZTE Proprietary and Confidential