Set Vlan Protocol-Mapping Session-No; Create Vlan Name - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Default
The protocol VLAN function is disabled.
Example
The following example enables the protocol VLAN function on port 10:
zte(cfg)#set port 10 protocol-vlan enable

4.5.7 set vlan protocol-mapping session-no

Purpose
This command sets a protocol VLAN template.
Command Mode
Global configuration mode
Syntax
set vlan protocol-mapping session-no <1-8>{ethernet2 | llc | snap}<0xHHHH> vlan <1-4094>
Parameter Description
Parameter
<1-8>
ethernet2
llc
snap
<0xHHHH>
<1-4094>
Guidelines
Eight templates are supported.

4.5.8 create vlan name

Purpose
This command creates a VLAN name.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Template number.
Matches ethernet2 type messages.
Matches llc type messages.
Matches snap type messages.
Messages' Ethernet type field.
VLAN ID allocated.
4-82
ZTE Proprietary and Confidential