Aaa-Control Port Max-Hosts; Aaa-Control Port Keepalive - Zte ZXR10 2900E Series Command Reference Manual

Example
The following example enables multiuser access for ports 1, 3, and 5:
zte(cfg-nas)#aaa-control port 1,3,5 multiple-hosts enable

4.20.24 aaa-control port max-hosts

Purpose
This command sets the maximum number of access users to the specified ports.
Command Mode
NAS configuration mode
Syntax
aaa-control port <portlist> max-hosts <0-256>
Parameter Description
Parameter
<portlist>
<0-256>
Guidelines
If the maximum number of access users is 0, it means that the number of access users to
the specified ports is not limited. In this case, the number of access users is limited by the
maximum number of users allowed by the switch.
Default
The maximum number of access users is 0.
Example
The following example sets the maximum number of access users to ports 1, 3, and 5 to 5:
zte(cfg-nas)#aaa-control port 1,3,5 max-hosts 5

4.20.25 aaa-control port keepalive

Purpose
This command enables or disables abnormal offline detection on the specified ports.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
The maximum number of access users.
4-391
Chapter 4 Service Configuration
ZTE Proprietary and Confidential