4.20.48 show radius accounting-stop
Purpose
This command shows RADIUS accounting packages that fail to be transmitted.
Command Mode
All configuration modes
Syntax
show radius accounting-stop [{ session-id <session-id>| user-name <user-name>| isp-name
<isp-name>| server-ip <A.B.C.D>}]
Parameter Description
Parameter
<session-id>
<user-name>
<isp-name>
<A.B.C.D>
4.21 QinQ Configuration
4.21.1 set vlan qinq customer port
Purpose
This command adds/deletes the customer ports of QinQ.
Command Mode
Global configuration mode
Syntax
set vlan qinq customer port <portlist>{enable | disable}
Parameter Description
Parameter
<portlist>
enable
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Displays by session ID.
Displays by user name.
Displays by ISP name.
Displays by ISP sever's IP address.
Description
Port list.
Adds customer ports.
4-407
Chapter 4 Service Configuration
ZTE Proprietary and Confidential