Set Port Multicast-Filter; Set Trunk Multicast-Filter - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Guidelines
If the port security function is enabled, the port MAC learning function is disabled and
unknown-source MAC messages are not forwarded. The port security function can work
with the authentication function to enable the access service.
Default
The port security function is disabled.
Example
The following example enables the security function of ports 1, 5, 6, 7 and 11:
zte(cfg)#set port 1,5-7,11 security enable

4.7.2 set port multicast-filter

Purpose
This command enables or disables the unregistered multicast filtering function for ports.
Command Mode
Global configuration mode
Syntax
set port <portlist> multicast-filter {enable | disable}
Parameter Description
Parameter
<portlist>
enable
disable
Example
The following example enables ports 1, 5, 6, 7 and 11 to forward multicast packets:
zte(cfg)#set port 1,5-7,11 multicast-filter disable

4.7.3 set trunk multicast-filter

Purpose
This command enables or disables the unregistered multicast filtering function for trunks.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
Enables the unregistered multicast filtering function, which means
to drop the unregistered multicast packets.
Disables the unregistered multicast filtering function, which means
to forward the unregistered multicast packets.
4-92
ZTE Proprietary and Confidential