Set Pppoe-Plus Tag-Format - Zte ZXR10 2900E Series Command Reference Manual

Parameters
Parameter
enable
disable
Example
The following example enables the PPPoE+ function:
zte(cfg)#set pppoe-plus enable

4.28.2 set pppoe-plus tag-format

Purpose
This command sets the format of PPPoE+ location information.
Command Mode
Global configuration mode
Syntax
set pppoe-plus tag-format port < portlist>{dsl-forum | cisco | china-tel| key <string>| manual
< string >}
Parameters
Parameter
<portlist>
dsl-forum
cisco
china-tel
key
< string >
manual
< string >
Example
The following example sets the PPPoE+ tag format of port 1 to cisco:
zte(cfg)#set pppoe-plus tag-format port 1 cisco
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Enables the PPPoE+ function.
Disables the PPPoE+ function.
Description
Port list.
DSL forum tag format.
Cisco tag format.
China Telecom tag format.
Key format.
Character string.
Customized format.
Character string format, '@'stands ' '(space);'\@' stands '@'; '\\'
stands '\' , which contains a maximum of 128 characters.
4-473
Chapter 4 Service Configuration
ZTE Proprietary and Confidential