Set Group Mac-Mode; Set Group Syslogsvr - Zte ZXR10 2900E Series Command Reference Manual

5.6.28 set group mac-mode

Purpose
This command sets the protocol multicast address for cluster management.
Command Mode
Cluster management configuration mode
Syntax
set group mac-mode {standard | extend [mac <HH.HH.HH.HH.HH.HH>]}
Parameter Description
Parameter
standard
extend
mac
<HH.HH.HH.HH.HH.HH>
Default
The default address is 01.80.c2.00.00.09.
Example
The following example sets the protocol multicast address for cluster management to
01.80.c2.00.00.13:
Cmdr.zte(cfg-group)#set group mac-mode extend mac 01.80.c2.00.00.13

5.6.29 set group syslogsvr

Purpose
This command sets the IP address of the cluster SYSLOG server.
Command Mode
Cluster management configuration mode
Syntax
set group syslogsvr <A.B.C.D>
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
Description
Uses the standard 01.80.c2.00.00.09 address.
Uses the extended address. If the mac parameter is not set, the
01.80.c2.00.00.10 address is used.
Uses the specified MAA address. The value range is
01.80.C2.00.00.11-13 or 01.80.C2.00.00.16-1F.
MAC address.
5-55
ZTE Proprietary and Confidential