Set Stp Instance Priority - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter Description
Parameter
<0-63>
port <1-52>
trunk <trunklist>
enable
disable
Guidelines
The ports enabling the loop-guard function cannot forward data.
Example
The following example enables loop-guard of port 1 in instance 1:
zte(cfg)#set stp instance 1 port 1 loop-guard enable

4.12.25 set stp instance priority

Purpose
This command sets the priority of bridge in instance.
Command Mode
Global configuration mode
Syntax
set stp instance <0-63> priority <0-61440>
Parameter Description
Parameter
<0-63>
<0-61440>
Guidelines
The priority must be a multiple of 4096. If the value you enter is not a multiple of 4096, the
system will automatically transform it to the value closest to the multiple of 4096.
Example
The following example sets the priority of bridge in instance 1 to 4096:
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Instance ID.
Port number. Different devices have different port number ranges.
In the syntax, the 2952E device is used as an example.
Trunk list.
Enables the loop-guard function.
Disables the loop-guard function.
Description
Instance ID
Priority of bridge
4-208
ZTE Proprietary and Confidential