Set Group V3; Set User V3 - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter
disable
Example
The following example enables the link trap function:
zte(cfg-snmp)#set trap linkup enable

5.4.13 set group v3

Purpose
This command sets an SNMP V3 group and the group's security level.
Command Mode
SNMP configuration mode
Syntax
set group <string> v3 {auth | noauth | priv}[read <string>[write <string>[notify <string>]]]
Parameter Description
Parameter
group <string>
noauth
auth
priv
read <string>
write <string>
notify <string>
/Example
The following example set a group named as BN, and set the group's security level to priv
and the read, write and notify views to bjView:
zte(cfg-snmp)#set group BN v3 priv read bjView write bjView notify bjView

5.4.14 set user v3

Purpose
This command sets a user name, authentication mode, and password for SNMP V3.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Disables trap.
Description
Group name
Neither authentication nor encryption
Authentication but no encryption
Authentication and encryption
Read view, zteView by default
Write view, zteView by default
Notify view, zteView by default
5-18
ZTE Proprietary and Confidential