Dot1X Re-Authenticate Enable/Disable; Dot1X Re-Authenticate Period - Zte ZXR10 2900E Series Command Reference Manual

Default
The vlanjump function is disabled.
Example
The following example sets that the users of ports 1, 3, 5 and 7 can access VLAN 1000
after authentication is passed:
zte(cfg)#set vlan 1000 enable
zte(cfg)#set port 1,3,5,6 vlanjump enable defaultauthvlan 1000

4.20.2 dot1x re-authenticate enable/disable

Purpose
This command enables or disables the re-authentication function.
Command Mode
NAS configuration mode
Syntax
dot1x re-authenticate {enable | disable}
Parameter Description
Parameter
enable
disable
Default
The re-authentication function is disabled.
Example
The following example enables the re-authentication function:
zte(cfg-nas)#dot1x re-authenticate enable

4.20.3 dot1x re-authenticate period

Purpose
This command sets the interval for re-authentication.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Enables the re-authentication function.
Disables the re-authentication function.
4-379
Chapter 4 Service Configuration
ZTE Proprietary and Confidential