Set Gvrp Port/Trunk Enable/Disable; Set Gvrp Port/Trunk Registration - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter
disable
Default
The GVRP function is disabled.

4.24.6 set gvrp port/trunk enable/disable

Purpose
This command enables or disables the GVRP on the specified ports/trunks.
Command Mode
Global configuration mode
Syntax
set gvrp {port <portlist>| trunk <trunklist>}{enable | disable}
Parameter Description
Parameter
port <portlist>
trunk <trunklist>
enable
disable
Guidelines
The set vlan permit/forbid command can be run to specify VLANs that can dynamically
add/delete ports/trunks.
Default
The GVRP is disabled on ports/trunks.

4.24.7 set gvrp port/trunk registration

Purpose
This command sets the registration type of ports/trunks in the GVRP.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Disables the GVRP function.
Description
Port list.
Trunk list.
Enables the GVRP.
Disables the GVRP.
4-428
ZTE Proprietary and Confidential